Lot of 10 Aruba AP-135 802.11a/b/g/n 450Mbps PoE WiFi w/Mounting Bracket


Out of stock

SKU: AP135-10 Category:



Aruba Networks AP-135 Access Points
The AP-135 access point (APs) maximizes performance for mobile devices in extremely
high-density Wi-Fi environments and ensure strong threat protection using integrated MACSec
security.Aruba AP-135 wireless AP, 802.11a/b/g/n, 3×3:3, dual radio, integrated antennas.
Contains: AP, installation guide and two ceiling rail mount adaptersThis multifunctional AP delivers
wire-like performance at data rates up to 450 Mbps per radio. Taking advantage of 802.11n
technology, the AP-135 employs three spatial streams to deliver 50% more throughput and
support 50% more mobile devices in high-density environments compared to previous-generation
APs.The AP-135 features the same radios with internal antennas. It is built to provide years of
trouble-free operation and are backed by a limited lifetime warranty.MACSec authentication and
encryption on Ethernet ports enable secure AP deployment by interoperating with the MACSec
capability on Aruba Mobility Access Switches and other wiring closet devices.The AP-135 features
dual 10/100/1000BASE-T Ethernet interfaces and operate from standard 802.3af and 802.3at
power-over-Ethernet (PoE) sources. The secondary Ethernet interface (active only when
supplying 802.3at PoE or DC power to the access point) enables secure authorized backhaul for
wired network-attached devices.Working with Aruba’s line of centralized Mobility
Controllers, the AP-135 delivers secure, high-speed network services that move users to a
“wireless where possible, wired where necessary” network access model. The
network can then be rightsized by eliminating unused Ethernet switch ports and thereby reducing
operating costs.The key to ensuring wire-like performance and reliability is Aruba’s unique
Adaptive Radio Management and spectrum analysis capabilities, which manage the 2.4-GHz and
5-GHz radio bands to deliver maximum client performance while mitigating any RF
interference.The multifunction AP-135 can be configured through the Mobility Controller to provide
WLAN access with part-time air monitoring for wireless IPS and spectrum analysis. It can be
configured as a dedicated air monitor within the campus WLAN or can be remotely located. It can
enable wireless mesh networking for high performance network backhaul where wired cabling is
not available.
Aruba Networks AP-135 Access Point – Technical Specifications
802.11n indoor APs designed to support maximum performance for maximum client density, with
maximum deployment flexibility and security.Operating Mode
• Campus AP, air monitor (AM) and spectrum monitor
• Remote AP, AM and spectrum monitor
Software-configurable dual radio capable of supporting 2.4 GHz and 5 GHz
RF Management
• Automatic transmit power and channel management control with auto coverage hole correction
via Adaptive Radio Management (ARM)
• Spectrum analysis scans the 2.4-GHz and 5-GHz radio bands to provide increased visibility into
non-802.11n RF interference sources and their effect on 802.11n channel quality.

  • Power Over Ethernet – Yes

  • Ruggedized Design – indoor

  • Internal Antenna Qty – 6

  • Power Consumption Operational – 15 Watt

  • Data Transfer Rate – 450 Mbps

  • Line Coding Format – QPSK

  • Spread Spectrum Method – OFDM

  • Features auto-sensing per device

  • Data Link Protocol – IEEE 802.11b

  • Compliant Standards – IEEE 802.3az

  • Connectivity Technology – wireless

  • Interface Ethernet 10Base-T/100Base-TX/1000Base-T

  • Connector Type – RJ-45

  • Min Operating Temperature – 32 °F

  • Max Operating Temperature – 122 °F


  • Width 6.7 in

  • Depth 6.7 in

  • Height 1.8 in

  • Weight 1.7 lbs
  • Additional information






    • AP-134: Three RP-SMA antenna interfaces for external dual-band antennas • AP-135: Six internal downtilt omni-directional antennas; three per

    Wireless Radio Specifications

    • AP type: Dual-radio, dual-band 802.11n indoor • Supported Frequency Bands (country-specific restrictions apply) • 2.400 – 2.4835 GHz • 5.150 – 5.250 GHz • 5.250 – 5.350 GHz • 5.470 – 5.725 GHz • 5.725 – 5.850 GHz


    15 watts


    2×10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX


    Dimensions / Weight: Unit: 0.760Kg, 170 mm x 170 mm x 45 mm


    Operating: Temp: 0° C to +50° C Humidity: 5 to 95% non-condensing