Cisco Systems Catalyst 2940 8-Port Ethernet Switch WS-C2940-8TF-S *Tested*


Out of stock

SKU: WS-C2940-8TF-S Category:


Tested and guaranteed to work

The Cisco Catalyst 2940 Series is extremely easy to set up and configure via Cisco Express Setup, a simple Web-Based setup utility.
For more advanced configuration and ongoing management, the Cisco Catalyst 2940 Series has a console port and supports remote
management protocols such as Telnet, Simple Network Management Protocol (SNMP), as well as Cisco Network Assistant, which is a
free PC-based network management application. Combine this with the rich functionality of Cisco IOS®
Software, and these switches
provide comprehensive functionality and manageability for classrooms, conference rooms, or other very small workgroup environments.
In addition, the Cisco Catalyst 2940 Series is supported by a limited lifetime warranty. The Cisco Catalyst 2940 Series switches provide
the lowest total cost of ownership in their product class with their durable design, enhanced security, simple installation and management,
and award-winning Cisco support.
Cisco Catalyst 2940-8TT:
Eight 10/100 ports
One 10/100/1000BASE-T port
Cisco Catalyst 2940-8TF:
Eight 10/100 ports
One 100BASE-FX port and One 1000BASE-X Small Form-factor Pluggable (SFP) slot (only one active port at a time)

Ease of Use and Ease of Deployment

Autoconfiguration: Switch automatically downloads configuration file using Dynamic Host Configuration Protocol (DHCP).
Autosensing: Each non-SFP port detects the speed of the attached device and automatically configures the port for 10-,
100-, or 1000-Mbps operation, easing switch deployment in mixed 10, 100, and 1000BASE-T environments.
Autonegotiating: Each non-SFP port automatically selects half- or full-duplex transmission mode to optimize bandwidth
Dynamic Trunking Protocol(DTP):● Each non-SFP port automatically selects half- or full-duplex transmission mode to optimize bandwidth.
Port Aggregation Protocol(PAgP) and Link Aggregation Control Protocol (LACP):Switch ports automatically configure as Cisco Fast EtherChannel®
groups or IEEE 802.3ad groups when there are
multiple links to another switch, router, or server
DHCP Relay: Allows a DHCP relay agent to broadcast DHCP requests to the network DHCP server.

Additional information




Cisco Catalyst 2940

Form Factor


Number of LAN Ports


Network Management Type




Ethernet Technology

Fast Ethernet (100-Mbit/s)

Sub type

Fast Ethernet

Authentication Method


Flash Memory

8 MB flash

MAC Address Table Size

8K entries

Status Indicators

Port status, port transmission speed, port duplex mode, link OK, status, link/activity

Nominal Voltage

AC 120/230 V

Frequency Required

50/60 Hz

Power Consumption Operational

15 Watt


internal power supply