Description
tested works great good condition.
Crestron® MediaManager is a comprehensive family of
affordable products fusing high-performance AV signal
distribution, device control, and facility-wide system
management. MediaManager simplifies the art of ProAV system
design and installation with complete hardware, software, and
low-cost wiring solutions. Whether installing a single
boardroom or a campus-wide network of AV systems,
MediaManager delivers power and value far beyond
conventional
products and designs.
The QM-WMC QuickMedia® Wall Plate Media Center provides an
elegant wall mount multimedia interface solution for any
MediaManager system, including applications ranging from
small conference rooms to large banquet halls and
auditoriums.
Wall Mount Multimedia Interface
The QM-WMC installs cleanly in a standard electrical box or
trim ring. Individual inputs are provided for composite,
S-Video, and RGB/component signals, each with corresponding
stereo audio, to accept connections from portable AV devices
and computers. A buffered monitor pass-thru connector is also
provided to feed the RGB input signal to a local monitor.
Connectivity for LAN and other signals can easily be added by
ganging the QM-WMC together with other 3rd-party wall plate
devices. A Crestron C2N-DB or C2N-CBD series keypad may
also be installed for a truly complete multimedia interface
and control solution. Wiring for the QM-WMC is extremely
simple requiring just a single CresCAT®QM cable (sold
separately).
AV Switcher
The built-in 3X1 switcher includes audio breakaway to allow
the three program audio inputs to be switched independent of
the video and RGB inputs, or linked with them. Built-in video
sensing on every video/RGB input can be utilized to trigger
automatic input selection and power control.
Gated Mic Preamp (Optional)
Two gated microphone inputs may be added using the QMWMIC
Microphone Input Module (sold separately). Via two Neutrik®
Combo connectors, the QM-WMIC supports both dynamic
and
condenser type microphones with software switchable 48V
phantom power available at both XLR inputs. Balanced or
unbalanced line-level sources can also be accommodated
using
the 1/4″ TRS connections. Input gain and gating controls
for each microphone/line input are fully adjustable at
setup, and can also be controlled in real-time from a keypad
or touchpanel.
QuickMedia® Transport
Using the revolutionary QuickMedia transport, all input
signals are transmitted from the QM-WMC to any QuickMedia
Receiver or Distribution Center over a single inexpensive
CAT5e type cable[1]. Computer resolutions up to 1920 X 1200
pixels at 60Hz are supported over cable runs up to 450 feet.
Audio signals are transmitted digitally with
high-performance 24-bit resolution. QuickMedia dramatically
simplifies system design and installation, affording a higher
