tested good condition
The QM-MD7X2 is a versatile matrix switcher and multi-channel digital audio signal processor featuring two QuickMedia® inputs and outputs plus five sets of local AV inputs, gated microphone mixing, and two audio outputs sections each with discrete program and speech channels. Occupying just one rack space, the QM-MD7X2 affords extensive signal routing and processing capability as a midpoint distribution switcher or front-end multimedia interface for a complete MediaManager AV presentation system.
Three sets of 3 BNC connectors are provided on the QM-MD7X2 to accept video inputs from three composite, S-Video, component, or HDTV sources. Two RGB inputs are also included to accept high-resolution computer sources up to 1920 X 1200 pixels. Five stereo audio inputs accommodate unbalanced line-level signals from computers and program audio sources.
In addition to the local inputs, there are two QuickMedia (QM) input ports which receive RGB, video, program audio and mic signals from FlipTop or Wall Plate transmitters over inexpensive CAT5e type cable* via Crestron’s exclusive QuickMedia transport.
The 7X2 video and audio switchers built into the QM-MD7X2 allow any of the local or QM input signals to be routed independently to either of two QM outputs. Each QM output can be used to feed a separate QuickMedia Receiver to support two independent display devices.
Additionally, two gated microphone inputs are included on the QM-MD7X2 with software switchable 48V phantom power at both inputs to support either dynamic or condenser microphones. Balanced or unbalanced line-level sources such as wireless microphones can also be accommodated. These two microphone/line inputs can be mixed with the two mic signals brought in at either QM input, with two independent 4X1 mixes possible to feed each of the two QM outputs. Each mix also includes independent 4-band speech-optimized graphic equalization for each individual microphone input.
Also key to the QM-MD7X2 is its two sets of local audio outputs, each consisting of a stereo program channel and a mono speech channel. These six balanced/unbalanced line-level outputs are designed to drive rack-mounted amplifiers like the QM-AMP3X80, as well as codecs, recorders, assistive listening devices, and more. Generally, Audio Output 1 contains the same stereo program signal and microphone mix as that fed to QM Output 1, and likewise for Output 2. However, the mix of left program, right program, and microphones is independently adjustable for each local output channel.
Each local output channel includes adjustments for volume, bass, and treble, a mute control, plus ten-band graphic equalization and 2-band parametric equalization. In addition, the speech outputs include up to 40mS of delay adjustment for loudspeaker alignment.
With such extensive control over the system’s audio performance, the QM-MD7X2 effectively eliminates the need for expensive outboard processors to attain precise adjustment tailored to the acoustical environment. All audio processing and mixing is performed in the digital domain, adjustable at setup using Crestron’s QM Tools software (part of Crestron Toolbox). Many parameters are also controllable in real-time from a keypad or touchpanel, with numerous presets that can be saved for instant recall to account for varying source material or room conditions.
To gain additional signal routing flexibility and expand input and output capacity, up to two QuickMedia Distribution Centers, Distribution Amplifiers, and Matrix Switchers may be cascaded in a given QuickMedia signal path*. For instance, a QM-MD8X8 or QM-MD4X2 may be used to expand the input capacity of the QM-MD7X2. Complete system operation can be made transparent to the end-user with all signal routing occurring smoothly under the command of the MediaManager control system. Built-in video-sensing on every input can be utilized to trigger automatic input selection and provide power status information to the control system.
Control and monitoring of the QM-MD7X2 is also possible independent of the control system using its front panel pushbuttons and LEDs. Customizable label strips are provided to easily designate inputs and outputs by name using Crestron Engraver software or standard 3/8″ tape labels. For security, the front panel controls can be locked out.
Versatile matrix switcher and audio processor
3 video, S-Video, or component inputs
2 RGB inputs | 1 RGB monitor pass-thru
5 stereo audio inputs | 2 gated microphone inputs
2 QuickMedia inputs | 2 QuickMedia outputs
2 audio outputs w/discrete stereo program and speech channels
Graphic and parametric equalization
Versatile input mixing and microphone EQ
Up to 40ms speech delay
Front panel controls | Single-space rack-mountable