Description
Charging Instructions:
1. The Site Survey Battery Pack must be charged before each use. It is recommended to charge the Site Survey Battery Pack immediately upon receipt and before any expected use. 2. Turn the Master Battery On/Off switch to the “On” position for charging to commence. 3. Turn the switch (labeled Switch in Diagram 1) to the “Charge / Off” or LEFT position. 4. Plug the Charger (Diagram 2) into a proper AC power source. 5. Plug the barrel connector end of the Charger (shown in Diagram 2) to the Charge Port (shown in Diagram 1) of the Site Survey Battery Pack. Turn the Master Battery Pack On/Off switch to the “On” position and then the light on the battery pack should turn red, indicating that the battery is charging. 6. The Charge Indicator light will show the status of the Charging process. It should start out “Red”, indicating that the battery is charging. It will then progress to “Green”, indicating the battery is fully charged. 7. The Charger is designed to switch to maintenance charge cycle once the Site Survey Battery Pack has reached full charge (Green in color). Leaving the Charger connected longer will NOT harm the Site Survey Battery Pack.
Feature
- Provides DC power for a full 6-8 hour shift of surveying
- Built-in RJ45 port that supports the 802.3af (Power over Ethernet) standard and supports any 802.3af compliant product
- 56 Volt port for the Cisco 1252 AP
- Built-in charge indicator light
- Feet are made with sturdy plastic for longer life
- Case made from aluminum to minimize weight
- Internal components are rugged to withstand use in the field
- Holes pre-drilled in lid to allow most manufacturers’ AP’s to be mounted directly to the battery pack using the manufacturers’ mounting bracket
- Includes charger and built-in handle
